So berechnen Sie die Zahnriemenlänge
Please Select the Following
Unit
| English | Metric |
Tooth Style (Pitch)
| MXL | XL | L | H |
| HTD 3mm | HTD 5mm | HTD 8mm | T2.5mm |
| T5mm | T10mm | AT5mm | AT10mm |
Number of Teeth - Large Pulley (A)
| 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 |
| 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 48 | 50 | 52 | 53 | 56 |
| 60 | 62 | 63 | 64 | 67 | 68 | 70 | 71 | 72 | 74 | 75 | 80 | 84 | 90 |
| 96 | 100 | 112 | 120 | 126 | 140 | 144 | 154 | 168 | 180 | 192 | 200 | 216 | 224 |
Number of Teeth - Small Pulley (B)
| 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 |
| 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 48 | 50 | 52 | 53 | 56 |
| 60 | 62 | 63 | 64 | 67 | 68 | 70 | 71 | 72 | 74 | 75 | 80 | 84 | 90 |
| 96 | 100 | 112 | 120 | 126 | 140 | 144 | 154 | 168 | 180 | 192 | 200 | 216 | 224 |
Belt Width (in)
| 0.118 | 0.125 | 0.236 | 0.25 | 0.354 | 0.375 | 0.394 | 0.472 | 0.5 | 0.59 | 0.63 |
| 0.75 | 0.787 | 0.827 | 0.984 | 1 | 1.181 | 1.26 | 1.417 | 1.457 | 1.5 | 1.575 |
| 1.969 | 2 | 2.165 | 2.441 | 2.677 | 3 | 3.346 | 3.543 | 4.528 | 4.921 | 6.693 |
Desired Center Distance (in)
| Attribute | Value |
| Speed Ratio | |
| Pitch Diameter - Large Pulley (A) (in) | |
| Pitch Diameter - Small Pulley (B) (in) | |
| Desired Belt Pitch Length (in) | |
| Next Available Belt Pitch Length (in) | |
| Next Available Number of Teeth - Belt | |
| Center Distance Using Next Available Belt (in) | |
| Teeth in Mesh |
