All Products

R8-2RS 12.7x28.6x7.9mm ZEN Deep Groove Ball BearingInside Diameter (mm):12.7Outside Diameter (mm):28.6Width (mm):7.9Please Note: Should the selecte...

FR8-2RS 12.7x28.6x7.9mm ZEN Deep Groove Ball BearingInside Diameter (mm):12.7Outside Diameter (mm):28.6Width (mm):7.9Please Note: Should the select...

6307-2RS 35x80x21mm ZEN Deep Groove Ball BearingInside Diameter (mm):35Outside Diameter (mm):80Width (mm):21Please Note: Should the selected brand ...

3204-B-2RS 20x47x20.6mm ZEN Angular Contact Ball BearingInside Diameter (mm):20Outside Diameter (mm):47Width (mm):20.6Please Note: Should the selec...

Belt Supplied as a BB112 - 1/2" X 112" Inside Length

PHS10 & STUD PTFE LINER FEMALE ROD END BEARINGThread Size:M10X1.50 Bore:10mm Thread Direction:Right HandPlease note:If the listed size is not a...

PHS6 & STUD PTFE LINER FEMALE ROD END BEARINGThread Size:M6X1.00 Bore:6mm Thread Direction:Right HandPlease note:If the listed size is not avai...

Continental® SYNCHROBELT Timing belts for the low and mid-power range. Temperature resistant between -30°C and +130°C, depending on the applic...

Continental ® SYNCHROFLEX Polyurethane timing belts for the low and mid-power range. Temperature resistant between -30 °C and +80 °C (please s...

610PJ/240J Major Branded Poly-V Belt Length Approx = 610mm// 24" J Section 2.34mm The Poly-V belt is a single, endless belt with longitudinal ...

G-Series is our standard range of metric and imperial clevises also known as ‘yoke’ and ‘fork’ ends. In addition to our catalogue range, we have pr...

Agricultural V-Belts have been created for drives with small pulley diameters and high temperature peaks, combined with a high grade of moisture an...

Glacier DU type bushes are a dry bearing material with good wear and friction performance over a wide range of temperatures, loads and speeds. DU b...

The tensioning element with the specificatpion SE (SE11 - SE45) is the mostly used standard unit for all kinds of chain and belt drives. The unit i...

Poly- V Belt pulleys are manufactured from cast iron and are black phosphated according to ISO9982 norms. All pulleys are statically balanced for p...

T5-305 Polyurethane Timing Belt Length (mm) 305 Number of Teeth (mm) 61 Width (mm) 8 // 10 // 12 // 16 // 25 Supplied in a leading...

12-5M Pilot Bore HTD Metric Synchronous Timing Belt Pulley Width Across Teeth (mm) 9 / 15 / 25 Boss Dia (mm) 13 Dia Over Flanges (mm) ...

12-5M Pilot Bore HTD Metric Synchronous Timing Belt Pulley Width Across Teeth (mm) 9 / 15 / 25 Boss Dia (mm) 13 Dia Over Flanges (mm) ...

Taper lock bush shaft fixing. Picture is for display purposes only.

SPA100 Taperlock Vee Belt Pulley *** IMAGE IS FOR DISPLAY PURPOSES ONLY*** Size Grooves Taper Bush Pitch Dia (mm) Outside Dia (mm) SPA100...

1651PJ/650J Major Branded Poly-V Belt Length Approx = 1651mm// 65" J Section 2.34mm The Poly-V belt is a single, endless belt with longitudina...

44643/44610 Dunlop Taper Roller BearingPlease Note: If the selected brand is not available a suitable alternative will be supplied

61902-2RS 15x28x7mm ZEN Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):28Width (mm):7Please Note: Should the selected brand n...