The SYNCHROFLEX belts have only two parts: a wear-resistant Contain carcass and high-quality endless steel wire tension members. Because of their excellent bond, has a high flank load capacity paired with low elastic elongation, making them unrivaled in quality and precision. Close tolerance timing belts are produced during production to ensure optimal mesh in all power ranges. These Continental Synchroflex Timing Belts are made in predetermined lengths in a mold. The timing belts are used in various ways and holds a great importance. However, if you are someone who is unaware, Keep reading the blog to learn about the timing belts in detail!

Introduction of Timing Belt

The timing belt is an unending belt with no breaks in the tensile reinforcement to the customer's length demand. This implies the usage of two spirally coiled tension wires. To fit a variety of uses, these cords might be composed of steel, very flexible steel, or stainless steel.

The toothed side of the optibelt ALPHA FLEX can be covered with polyamide fabric when the belt is at least 1,500 mm long. This timing belt is one of the best equipment used by the manufacturing industries and other machine-based factories.

Use / Application

Antistatic Synchroflex Timing Belts are used where electrostatic charges are not wanted or are prohibited, such as while transporting electronic components, drives, and conveying equipment in an explosive environment. The application varies with the time and is effective for multi-purpose use.

Charges electrostatically

Electric charges can be expected if timing belts, e. g. pulley and timing belt are involved due to the continuous separation of two contact surfaces. This electric charge can be significant and as high as suggesting the fire risk at the discharge time. The value of the electric bill is determined by the materials used to make the timing belt, synchronous pulley, tension roller, and support roller. It rises with increasing belt speed, pretension, and contact surface width.

Antistatic characteristics

Continental Synchroflex Timing Belts with antistatic properties reliably prevent the creation of electric charges. Surface resistance must be less than 3108 according to DIN 22104 "Antistatic conveyor belts." Antistatic, The surface resistance of Synchroflex® timing belts is R 106. The timing belts are best in their use.

Quality control

Conductivity is measured with flexible electrodes that fulfill ISO 9563 standards. The wear resistance of the antistatic layer is evaluated on a test belt for timing belts with antistatic facing upon request. Sufficiently strong wear resistance and conductivity are assured if the wear resistance test reveals a surface resistance of R 106. Because the conductivity of the antistatic timing belts can deteriorate with extended use and possible wear, regular checks of the resistance values are required.

Final Thoughts

Hope now you are well versed with the Continental Synchroflex Timing Belts. If you want to buy the best, then https://bepltd.com/ is your place to visit. They offer the best-in-class timing belts exclusively designed with high-quality materials. Feel free to visit their website for more details!